Temperature Sensors, Thermometers and Probes

Showing posts with label TC Wall Port. Show all posts
Showing posts with label TC Wall Port. Show all posts

Thursday, 20 June 2019

Low Cost Test Solution for Unblended Hot and Cold Water Pipes

TME’s DoubleTC Wall Port is a NEW test accessory for simplifying test and monitoring of unblended hot and cold water temperatures for legionella risk management.

TME’s TC Wall Port System already provides a low cost solution for connecting fine-wire temperature sensors/probes to concealed TMVs, crowded calorifier pipes and overhead tanks. The new Double Port is a new addition to the system, connecting two pipes from one location to facilitate remote tests on unblended hot and cold water pipes.

How does it work?
The Double TC Wall Port is the same compact size as the single (52 x 52 mm) but houses two thermocouple connection points instead of one, wired to a choice of lengths up to a maximum of 20 meters. Attach the sensors to hot and cold feed pipes and leave them in place. Ongoing tests are easily taken by plugging a thermometer into the wall port without needing to access the pipes directly, delivering an instant, accurate result every time.

Low Cost Simplicity
At just £16 for a single wall port or £22.50 for a 1 meter double, installation can be achieved from under £25 per water point, leaving a fast, affordable testing method permanently in place.

Will my existing thermometer be compatible?
Any thermocouple input thermometer is compatible but TME recommends its MM2000 or MM2008 with a single plug to plug cable (only one required).

Paperless Recording Option
For paperless recording, the TC Wall Port System is compatible with TME’s unique MM7000-2D Barcode Scanning Thermometer.



24 Hour Monitoring
TME also supplies TC wall Port compatible WiFi Data Loggers with single or double thermocouple TMELOG1250 or TMELOG1210 offering continuous temperature profiling with email and text alerts plus optional cloud data storage.


About TM Electronics
TME is a UK manufacturing company with more than 25 years’ experience, supplying thermometers and temperature sensors for all uses but especially Legionella Risk Management and Food Safety.

Want to know more?


Wednesday, 2 December 2015

New Developments: Thermometer Kit with Integral Timer simplifies Legionella Water Tests

Temperature specialists, TM Electronics (UK) Ltd asked engineers involved in water temperature testing how their job could be made easier. The feedback was unanimous - a handheld thermometer with integral timer for one and two minute running times for hot and cold water outlets. 
TME's CLEGK1 Compact Legionella Temp Kit
TME listened to the comments from the 2015 Healthcare Estates Conference in October and responded quickly. Just one month on and the company is already launching the CLEGK1 Compact Legionella Temp Kit, featuring the new MM2008 Legionella Thermometer with Integral Timer and the BSKS01-S Dual Purpose Temperature Probe – all for the special introductory price of just £120.

The MM2008 features 1 minute and 2 minute countdown buttons, making it much easier to use for timing hot and cold water tests - an essential requirement for Legionnaires’ disease risk assessment, management prevention & testing to ACoP L8. The BSKS01-S has a fully waterproof construction which means it can be used for both running water and pipe surface temperature measurement.

TME prides itself on solving problem temperature applications for its customers, continuously developing new designs and improving functionality in response to just this kind of feedback. MD, Tom Sensier, explains:

“Trying to look at your watch while holding a thermometer and probe is tricky and separate timers are obviously inconvenient - so our design department got straight onto the problem, quickly coming up with a practical design solution that simplifies the whole operation.”

Main Features of the CLEGK1

  • Waterproof thermometer to IP67 (MM2008) 
  • Integral Countdown Timer on Thermometer Display
  • Counts down 1 minute (Hot) and 2 minute (Cold) water running times at the touch of a button
  • Thermometer compatible with all K-Type probes with mini plug
  • High Accuracy
  • Wide temperature range
  • Waterproof dual purpose probe for liquid and surface temperature measurement (BSK01-S)
  • Thermometer for Life Guarantee        
The CKEGK1 is the latest addition to the company’s range of Temperature Monitoring Equipment for Legionella Water Temperature Testing and is fully compatible with its other innovative products including the low cost TCWallPort for spot cheks on test points with difficult or impaired access using its K Type Fine Wire Thermocouple probes.                      
TME – When temperature matters

www.tmethermometers.com | 01903 700651 | sales@tmethermometers.com

Monday, 28 September 2015

TME’s Legionella Temperature Range at IHEEM 2015

Healthcare estates managers looking for innovative temperature measurement solutions should visit TME’s stand at this year’s Healthcare Estates exhibition at Manchester Central, Manchester (20-21st October). To celebrate 25 years at the cutting edge of digital thermometer design and manufacture, this family-run, British business will be offering creative solutions to legionella water temperature testing applications across the health sector. Come and see us at Stand C50.


Image courtesy of IHEEM

MD, Tom Sensier says: “Legionnaires’ disease is one of the biggest risks to healthcare estates today, so we’ve created a dedicated Legionella Temperature Range to ensure streamlined, no-fuss water temperature monitoring across the healthcare sector.”

Legionella Temperature Range:

  • Barcode Scanning Thermometer: With user programmable alarms for critical temperatures, TME’s MM7000 thermometer range provides paperless temperature logging using Barcodes, generating detailed information on each scan, including the identifying details of each test point. Traceability is no longer a problem - records can be downloaded via Bluetooth or USB to PC/PDA, using open-source software. 
  • Dual Purpose Probes: The unique probe saves time and money during spot checks as it can be used for measuring both the surface temperature of pipes and the temperature of running water.
  • TC Wall Port: This remote temperature monitoring system uses discrete fine-wire sensors, which are attached to a temperature test point and left in-situ. The wires are run to the TC Wall Port, which is screwed to the wall. To take temperature readings, just ‘plug’ in a thermometer for an instant temperature reading from up to 20m away – no need to climb ladders or dismantle boxing. 
  • Immersion Probe: A compact probe specially designed to be dropped into water tanks and left in situ. 
  • Legionnaires’ Kits: Easy to use thermometer kits at a variety of price points in a carry case or holster for engineers on the move.
TME are proud to announce that MD Tom Sensier will also be speaking at the event, as part of the Water & Infection Control Zone set up by IHEEM with The Water Management Society, Legionella Control Association and BEAMA.

Tom will be introducing the latest technology in paperless recording systems for Legionella water temperatures, reducing the time & cost invested in water temperature monitoring using barcode scanning thermometers.

TME – When temperature matters

www.tmethermometers.com | 01903 700651 | sales@tmethermometers.com

Monday, 8 December 2014

Spotlight on...Legionnaires' Disease

TME temperature sensors, thermometers and probes are used across a huge range of different industries and applications. In this series of posts, we'll shine a spotlight on some of the most troublesome temperature problems, and how TME helps to solve them.
Legionella Bacteria (Photo sourced from: http://www.theguardian.com)
Legionnaires' Disease is an incredibly dangerous illness, caused by the legionella bacteria. It is the most serious of a group of diseases caused by this bacteria, which are known collectively as Legionellosis. 

The disease presents with symptoms of high fever, muscle pain and chills. If the bacteria spreads to infect the lungs, it can result in a persistent cough, chest pains and breathing difficulties. 

Certain members of the public, such as people over 45, people with impaired immune systems and smokers, are much more susceptible to contract Legionnaires' disease than the general population. Although the disease is generally treatable with antibiotics, it can lead to complications such as septic shock or some organs, such as lungs and kidneys, ceasing to work correctly. A 2014 outbreak of the disease in Portugal was been the cause of at least 7 deaths.

Legionnaires' disease is contracted when people inhale small droplets of water which contain the legionella bacteria. There are certain conditions in which the legionella bacterium thrives. One of the most common of these is when water is stored/distributed at a tepid temperature.

The potential effects of an outbreak of Legionnaires' disease are so severe that the HSE (Health and Safety Executive), which is a UK government agency, have put in place requirements for helping businesses to prevent outbreaks.

According to the HSE guidelines, to prevent an outbreak of Legionnaires’ disease water should be supplied at at least 60°C from the heat source, and should return to the source from each water circulating loop at at least 50°C (or 55°C in healthcare premises). All individual outlets should reach 50°C (or 55°C in healthcare premises) within one minute of turning on the tap. Cold water should be distributed below 20°C.

The HSE’s code of practise L8 requires all businesses to implement a full legionella risk assessment, and to maintain an effective water temperature testing regime in order to prevent outbreaks of the disease.

Solutions from TME

TME are offering a range of solutions to help streamline water temperature testing for preventing Legionnaires' disease, including dual purpose surface/immersion probes, barcode scanning thermometers to help make record-keeping paperless and effortless, and, most recently, the TC Wall Port System.

TME's TC Wall Port System is a quick and easy solution that centres around the TC Wall Port, a small, unobtrusive thermocouple monitoring point that enables remote testing of difficult to access temperature testing points from up to 20m away.




Depending on the number of showers, taps and water tanks present, a reliable legionella control regime could require thousands of temperature tests every year. Taking temperatures from running taps is straightforward but boxed-in pipes and TMV’s can be awkward and time consuming as are tanks located at high level or in confined spaces.


TME’s innovative TC Wall Port System speeds up temperature checks on sentinel points, pipes, mixer valves, calorifiers and cold water tanks. Easy-to-use kits combine accurate thermometers with discrete, wall-mounted thermocouple monitoring points for immediate temperature readings up to 20 metres away with no loss of accuracy.
Main Applications















  • Boxed-in TMVs – no need to access the valve each time to check hot water temperature
  • Pipework including boiler flow and return points
  • Water Storage Tanks (with special immersion probe)
  • High-level test points - avoid using ladders and Working at Height restrictions
  • Remote measurement of cold storage, environmentally sensitive rooms or hazardous areas

How does the system work?This system uses a low-cost fine wire temperature sensor, attached to the temperature test point (pipe, valve etc) and left in-situ. The wire is then run to the TC Wall Port, sited in a convenient position. Temperature is read by plugging a thermometer into the port. Compatible thermometers include TME’s MM2000 or for paperless recording our MM7000 ThermoBarScan. For water tanks, the KM07immersion probe is also ideal. See attached information sheet.

The products that make up the TC Wall Port System:
The Wall PortThe new device is a thermocouple temperature sensor monitoring point which can be conveniently mounted to facilitate spot checks on any test point with difficult or impaired access. The port is designed for use with fine wire probes which are attached to the temperature test point and left in-situ. These wires are then run to the port – a wall-mounted, small white box measuring just 52 x 52mm. This allows temperatures to be taken by simply ‘plugging’ a standard thermocouple thermometer into the wall port – much easier and less time-consuming than dismantling boxing below sinks or using ladders to access covered tanks, necessitating working at height. 
The Fine Wire

When using the TC Wall Port, a fine wire probe is run from the port to a temperature testing point. The KA01 Fine Wire Probe is a simple sensor which can be attached to anything from a pipe to a calorifier. The probe comes in a variety of lengths up to 20m, so, however far away a temperature test point is, the TC Wall Port System can monitor it.


The Immersion Probe
For the measurement of water tanks, the KM07 Water Tank Immersion Probe can be immersed in the tank and stay there permanently, enabling the remote monitoring of water tank temperature. The KM07 is also available up to 20m in length, so even if your water tank is in the roof or attic, you can still monitor its’ temperature accurately using the TC Wall Port System
Remarkably cost-effectiveThe TC Wall Port System is an affordable option. Got a problem test point in mind? With our standard wall port equipment you could simplify your legionella prevention regime for less than £25 including VAT.



The Connection Cable

If you are using the TC Wall Port System, you will need a connection cable. TME’s KMPC1MP Connection Cable plugs into the two-pin plug at the front of the Wall Port at one end, and to the identical plug in your thermometer at the other. Now you’re ready to take your remote temperature readings.


The Dual Purpose Probe

Most water temperature spot checks require testing of running water and testing of surface temperature of a pipe. When the test points are easy to access, both of these jobs can be carried out using TME’s KS16-S Dual Purpose Probe. This strong and durable probe is able to carry out both surface and immersion temperature testing, giving facilities managers an all-in-one solution to water temperature spot checks.

The ThermometersIf you’re planning on carrying out water temperature tests, you’ll need a thermometer! Below are two of TME’s bestselling digital thermocouple thermometers, which are compatible with all TME probes.
The MM2000
TME’s bestselling thermometer, the MM2000 Handheld Thermometer, is a single-input, IP67 waterproof digital thermometer which is both highly accurate and cost-effective. All MM2000 Thermometers are entered into the Thermometer for Life scheme, which guarantees to replace/repair any thermometer you break for no more than £35.
The MM7000
For complete paperless recording, the MM7000 ThermoBar Scan Thermometer can record and download not only temperature, time and date but also the unique location of every pipe, tap or calorifier tested. This is possible through its’ integrated barcode scanner. Downloads are made via the inbuilt Bluetooth technology, to any PC, PDA, tablet or smartphone. Keeping accurate, reliable records of every test point will considerably reduce the risk of the spread of legionella in your facility.




Trust the experts
The TC Wall Port System is the most recent in a range of innovative products developed specifically by TM Electronics to support water temperature monitoring, and remote monitoring of sensitive or hazardous environments. The company leads the field in producing robust, waterproof equipment and portable kits to improve on reliability and convenience.

For more information on TME thermometers and probes for legionella monitoring, visit www.tmethermometers.com for online purchasing or contact the Sales Team on 01903 700651, sales@tmethermometers.com